WNMU080608EN-GM — Turning Inserts

WNMU080608EN-GM indexable carbide insert — VPOINT Carbide

Product photograph — VPOINT Carbide.

Specification

Only the fields the source data actually carries are listed. Nothing is estimated — a certified drawing, tolerance class and grade sheet are issued with the quotation.

ISO designation	`WNMU080608EN-GM`
Shape	Trigon 80°
Clearance angle	0°
Tolerance class	M
Hole / chipbreaker type	countersunk hole, special
IC size code	`08` ISO size code
Thickness code	`06` ISO thickness code
Corner radius	0.80 mm
Chipbreaker	`GM` — Grooving, stainless
VPOINT grade	VPM10
Source grade ref.	MS20310
Material group	MStainless steel
Substrate	Fine-grain tungsten carbide, 10–12 % Co
Coating	PVD TiAlN + CrAlN multilayer
Series	Milling Inserts

Recommended cutting parameters

Speeds and feeds are validated per application rather than published as one fixed figure, so this item is quoted with cutting data for your job. Send the workpiece material, its hardness and your machine setup and engineering will return a starting point for roughing, semi-finishing and finishing.

Request cutting data on WhatsApp

Compatible holders

Seats in any holder machined to the equivalent ISO designation. Holder part numbers are supplied with the quote, or on request.

Kyocera (not equivalent)

Brand names are shown only to indicate similar positioning. VPOINT parts are not manufactured by, licensed by or affiliated with those brands.

Questions about WNMU080608EN-GM

Is VPOINT WNMU080608EN-GM interchangeable with the equivalent insert from other manufacturers?

VPOINT WNMU080608EN-GM follows the same ISO 1832 designation and geometry as the established turning inserts inserts it is positioned against, so it seats in the same holder for most operations. It is a compatible alternative rather than a branded original — cutting data should be validated on your own machine before production.

Can VPOINT supply WNMU080608EN-GM in a custom grade or coating?

Yes. VPOINT manufactures in-house and offers OEM/ODM supply, so WNMU080608EN-GM can be produced in a different substrate class, coating or edge preparation to suit your material and machine. Send the workpiece material and cutting conditions and engineering will propose a grade.

What is the minimum order quantity for WNMU080608EN-GM?

VPOINT serves both distributors and end users, so there is no fixed wholesale-only minimum. Trial quantities are available for evaluation, and pricing steps down at distributor volumes. Request a quotation through the enquiry form or WhatsApp.

Related items

WNGG080404

New Arrivals

Turning Inserts

IC 08r (mm) 0.40Shape Trigon 80°

View insert →

WNMA060408

Sandvik-Interchangeable Series

Turning Inserts

IC 06r (mm) 0.80Shape Trigon 80°

View insert →

WNMG060404-NN

Lamina-Interchangeable Series

Turning Inserts

IC 06r (mm) 0.40Shape Trigon 80°

View insert →

WNMG060404-PM

Sandvik-Interchangeable Series

Turning Inserts

IC 06r (mm) 0.40Shape Trigon 80°

View insert →

WNMG060408-NN

Lamina-Interchangeable Series

Turning Inserts

IC 06r (mm) 0.80Shape Trigon 80°

View insert →

WNMG060408-PM

Sandvik-Interchangeable Series

Turning Inserts

IC 06r (mm) 0.80Shape Trigon 80°

View insert →

WNMG080404-HM

KORLOY-Interchangeable Series

Turning Inserts

IC 08r (mm) 0.40Shape Trigon 80°

View insert →

WNMG080404-HT

Proprietary Profiles

Turning Inserts

IC 08r (mm) 0.40Shape Trigon 80°

View insert →